Bonkers

My Controlled Crazy Quilt, which I'm naming Bonkers, was so much fun to make. I really loved  making those scrappy blocks for the front especially, though making the back was great too. I estimate I used 4.25 yards worth of multi-colored scraps in the making of the front and the back.

For quilting, I opted for fancy straight-line, which consists of vertical straight-line quilting topped with organic zig-zags. I thought that went well with the mix of straight lines and angles in the quilt top. For thread, I used Aurifil 50wt 4668 [Strawberry Parfait], a red, pink, and white variegated thread. I originally planned to quilt with plain red, but was afraid it might be overwhelming, so the Strawberry Parfait felt like a good option, plus I'd never used it before. I'm happy enough with the result.

For the binding, there were a couple of ways I wanted to mimic the wide ribbon binding and hand-embroidery stitches on traditional crazy quilts. To prepare my quilt for that once the quilting was complete, I made sure to trim the batting and backing about 1.5" wider than my quilt top all around. This can be a little tricky, but with a block-based quilt, I was able to get it pretty square.

• Then, I used a solid Kona Rich Red, and cut binding strips 8.5" wide, piecing them with straight seams, only because at that width, it would have meant a lot of fabric loss if pieced on the diagonal. Also not my norm, but I sewed it on the back first, then folded it over to the front, mitering the corners, clipping them temporarily with binder clips. [Apologies for not getting a photo of the back before the binding went on. I marked a line 1.5" from all edges, and then lined up the raw edges of the binding along it as I sewed it on. If you need help doing a chunky binding, check out Audrey Esarey's free Wide Binding Tutorial.]

• Another detail to simulate traditional crazy quilts was to sew the binding on with a decorative stitch showing on the quilt front. I just didn't feel like this particular quilt was up for a bunch of hand-embroidery stitches, so at least the thought is there. On my Janome MC 6700P, I used stitch #106 at its widest and longest (9.0/5.0). I chose it since it kind of reminded me of the first embroidery stitch I learned, the cross-stitch, plus it mimics the zig-zag in the overall quilting.

I think it makes for a nice finish!

My priority, of course, was holding down the binding edge on the front, so placement is not always on the binding on the back, as shown below - top and third corners are front corners; second and fourth corners are back corners. But overall, I'm good with it, and I love that it's something different for me and that I tried out a decorative stitch on my machine.

The quilt front originally measured 45.5" x 54.5", but with its chunky binding, the finished quilt now measures 48" x 58".

I remember years and years ago, I thought I might want to make a crazy quilt, and even took a workshop on it. After making a small sampler, complete with hand embroidery, I decided I wasn't interested. I'm glad I waited until now, because Bonkers is much more my style. I'm thinking I might want to make another one. Don't forget! Except for the binding, scraps from my scrap basket made up every inch of this quilt.